Product Center

Contact Information

Consultation Hotline:

+86 18062109704

Email: yqzhu@nengshi.com

Address: No. 336, Heping Avenue, Wuchang District, Wuhan City

Message Inquiry

pH/ORP/EC/Temp Multi-parameter Sensor

Technical Features:

● pH range: 0–14 pH

● ORP range: ±2000 mV

● Conductivity range: 0–2000 μS/cm

● Temperature range: 0–80°C

● Residual chlorine range: 0–20 mg/L

● Pressure rating: 0.6 MPa

● 3/4 NPT threaded installation, with secure and reliable sealing

● Outer tube material: plastic

● Temperature compensation resistors: PT100, PT1000, 2.252 kΩ, 10 kΩ, 22 kΩ, etc.

● 2-in-1, 3-in-1, or 4-in-1 multiparameter Sensors available

Contact for consultation
PRT2121 Series

PRT2121 Series

As shown in the figure:

● The Sensor can be directly matched with various domestic or imported instruments.

● Strong anti-interference capability, resistant to contamination and clogging, long service life, and continuous, stable measurements.

● The reference system is filled with a polymeric polymer, making it easy to use and eliminating the need to replenish the electrolyte.

● The Sensor has a sensitive response (it can reach more than 95% of the measured value within a few seconds).

● 3/4 NPT pipe thread installation, with secure and reliable sealing

● Withstand voltage of 0.6 MPa, zero potential E 0 =7 pH

● Dimensions: ∅22×110mm

● Outer tube material: plastic

● Temperature compensation resistors: PT100, PT1000, 10 kΩ, 2.252 kΩ, 22 kΩ, etc.

● pH range: 0–14 pH

● ORP range: ±2000 mV

● Conductivity range: 0–20,000 μS/cm

● Temperature range: 0–80°C

● Residual chlorine range: 0–20 mg/L

 

Model Selection:

● 3-in-1 Sensor:

PRT2121 pH/ORP/Temperature

PLT2121 pH/Residual Chlorine/Temperature

PCT2121 pH/EC/Temperature

RCT2121 ORP/EC/Temperature

CLT2121 EC/Residual Chlorine/Temperature

● 4-in-1 Sensor:

PRCT2121 pH/ORP/EC/Temperature

PCLT2121 pH/EC/Residual Chlorine/Temperature

PRT2121D Series

PRT2121D Series

As shown in the figure:

● Intelligent Sensor with RS485 output, which directly converts analog signals into digital signals

● Data is stored inside the Sensor, such as important parameters like zero point and slope.

● No calibration required—just plug in and use.

● Convenient to use, no transmitter required; the Sensor outputs a digital signal that can be directly connected to a computer.

● The Sensor’s digital output can be directly converted into WIFI or GPRS signals for wireless transmission.

● Data can be transmitted both over short and long distances, with stable and reliable measurement values.

● 3/4 NPT threaded connection for top and bottom mounting, ensuring secure and reliable sealing

● Withstand voltage of 0.6 MPa, zero potential E 0 =7 pH

● Dimensions: ∅28×176mm

● Outer tube material: plastic

● pH range: 0–14 pH

● ORP range: ±2000 mV

● Conductivity range: 0–200,000 μS/cm

● Temperature range: 0–80°C

● Residual chlorine range: 0–20 mg/L

 

Model Selection:

● Intelligent 3-in-1 Sensor with RS485 Output:

PRT2121D pH/ORP/Temperature

PLT2121D pH/Residual Chlorine/Temperature

PCT2121D pH/EC/Temperature

RCT2121D ORP/EC/Temperature

CLT2121D EC/Residual Chlorine/Temperature

● Smart 4-in-1 Sensor with RS485 Output:

PRCT2121D pH/ORP/EC/Temperature

PCLT2121D pH/EC/Residual Chlorine/Temperature