Product Center
Contact Information
Consultation Hotline:
Address: No. 336, Heping Avenue, Wuchang District, Wuhan City
Message InquirypH Sensor for Pure and Ultrapure Water
Technical Features:
● Adopts the most advanced annular large-cross-section Teflon diaphragm in the world, ensuring a stable liquid junction for the Sensor
● Strong anti-interference capability, resistant to fouling and clogging, and longer service life
● The reference system is filled with a polymeric polymer, making it easy to use and eliminating the need to replenish the electrolyte
● Rapid response (reaches 95% of the measured value within a few seconds)
● Measurement range: 0–14 pH; temperature: 0–110°C
● Pressure resistance: 0.6 MPa; Zero potential: E 0 =7 pH
● The sensor is suitable for various ultrapure water
● Temperature compensation resistors: 10 kΩ, PT100, PT1000, 2.252 kΩ, etc.
ASP3251 Series
As shown in the figure:
● PG13.5 threaded mounting, internationally recognized standard
● VP connector, making installation and replacement of the Sensor very convenient
● The Sensor is suitable for pure water with a conductivity ≥1 μS/cm.
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–110°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅12×120mm, 225mm, or other sizes
● Outer tube material: glass
● Temperature compensation resistors: PT100, PT1000, 2.252 kΩ, 10 kΩ, etc.
Model Selection:
ASP3251 Combination Sensor with thermistor
ASP3251D Digital Sensor with RS485 Output, No Calibration Required, Plug and Play
ASP3211 Series
As shown in the figure:
● PG13.5 threaded mounting, internationally recognized standard
● The Sensor comes with a fixed lead, the length of which can be adjusted according to user requirements
● The Sensor is suitable for pure water with a conductivity ≥1 μS/cm
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–110°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅12×120mm, 225mm, or other sizes
● Outer tube material: glass
● Temperature compensation resistors: 10 kΩ, PT100, PT1000, 2.252 kΩ, etc
Model Selection:
ASP2211 Combination Sensor
ASP3211 Combination Sensor with Thermistor
ASP3211D Digital Sensor with RS485 Output, No Calibration Required, Plug and Play
ASP2221
As shown in the figure:
● S8 connector, PG13.5 threaded mounting
● The Sensor is suitable for pure water with a conductivity ≥1 μS/cm
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–110°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅12×120mm, 225mm, or other sizes
● Outer tube material: glass
ASP2281
As shown in the figure:
● S7 connector for easy installation and replacement
● The Sensor is suitable for pure water with a conductivity of ≥1 μS/cm
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–110°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅12×120mm, 225mm, or other sizes
● Outer tube material: glass
ASP2201 Series
As shown in the figure:
● The sensor is with fixed cable, the length can be adjusted according to user requirements
● The sensor is suitable for pure water with a conductivity ≥1 μS/cm
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–110°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅12×120mm, 225mm, or other sizes
● Outer tube material: glass
● Temperature compensation resistors: PT100, PT1000, 2.252 kΩ, 10 kΩ, etc.
Model Selection:
ASP2201 Combination Sensor
ASP3201 Combination Sensor with Thermistor
ASP3255 Series
As shown in the figure:
● The sensor is suitable for pure water with conductivity ≤1 μS/cm.
● Uses imported ceramic diaphragms with ceramic micropores smaller than 1 μm
● VP connector, convenient for installing and replacing the Sensor
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–110°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅12×120mm, 225mm, or other sizes
● Outer tube material: glass
● Temperature compensation resistors: PT100, PT1000, 2.252 kΩ, 10 kΩ, etc.
Model Selection:
S7 Connector: ASP2285 Combination Sensor
S8 Connector: ASP2225 Combination Sensor
VP connector: ASP3255 Combination Sensor with Thermistorr
VP connector: ASP3255D Digital Sensor with RS485 output, no calibration required, plug and play
Fixed wire:
ASP2215 Combination Sensor
ASP3215 Combination Sensor with Thermistor
ASP3215D Digital Sensor with RS485 Output, No Calibration Required, Plug and Play
ASPS3221 Series
As shown in the figure:
● 3/4 NPT threaded connection for top and bottom mounting, ensuring secure and reliable sealing
● Both flow-through and submersible designs are easy to install
● The sensor is with VP connector or fixed cable, and the wire length can be adjusted according to user requirements
● The sensor is suitable for pure water with a conductivity ≥1 μS/cm.
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–100°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅28×165mm or other dimensions
● Outer tube material: PPS plastic
● Temperature compensation resistors: PT100, PT1000, 2.252 kΩ, 10 kΩ, etc.
Model Selection:
ASPS2221 Combination Sensor with Fixed Cable
ASPS3221 Combination Sensor with Thermistor and Fixed Cable
ASPS3221D Digital Sensor with Fixed Cable and RS485 Output, No Calibration Required, Plug and Play
ASPS3251 Combination Sensor with Thermistor and VP Connector
ASPS3251D Digital Sensor with VP Connector and RS485 Output, No Calibration Required, Plug and Play
ASPS1111 Series
As shown in the figure:
● The Sensor can be directly matched with various domestic or imported pH meters.
● Rotating snap-fit installation
● Both flow-through and submersible designs are easy to install.
● The Sensor comes with a VP connector or a fixed wire, and the wire length can be adjusted according to user requirements.
● Measurement range: 0–14 pH; Zero potential: E 0 =7 pH; Temperature range: 0–100°C
● Pressure resistance: 0.6 MPa
● Dimensions: ∅26×160mm or other dimensions
● Outer tube material: plastic
● Temperature compensation resistors: 10 kΩ, PT100, PT1000, 2.252 kΩ, etc.
Model Selection:
ASPS1111 Three-Component Sensor with Fixed Lead
ASPS1151 Triple Composite Sensor with VP Plug
ASPS1111D intelligent Sensor with fixed wire and RS485 output, no calibration required, plug and play
ASPS1151D Intelligent Sensor with VP Plug and RS485 Output, No Calibration Required, Plug and Play
National Sales Hotline: 24/7
Address: No. 336, Heping Avenue, Wuchang District, Wuhan City
Copyright © Nengshi Analytical Sensor Co., Ltd.
Business License
SEO
This website supports bidirectional access via IPv4 and IPv6.